Product lines
TAMKO's lineup is organized by tier — an entry-level architectural shingle for the most common re-roof, and a designer or performance tier above it for homeowners weighing curb appeal, higher wind/impact ratings, or both. The real difference between tiers is documented below on each product line's own page — not a marketing label.
Choosing between TAMKO's tiers isn't just a budget decision — a higher tier generally means a real, measurable difference in wind and impact rating, not just a nicer color palette. In Central Florida specifically, that difference shows up during the storm seasons this site's own county pages document, which is why we walk through the actual tradeoffs during a free assessment rather than defaulting everyone to the same tier.
Every product line below links to its own dedicated page — the real named products in that tier, the manufacturer-published technology behind it, and a plain-language FAQ. None of it substitutes for your own assessment, but it's meant to leave you asking better, more specific questions when that conversation happens.
Two warranties, and only one of them is about the crew
A "warranty" on a roofing job is actually two separate things, and the difference matters more than most homeowners realize until something goes wrong. The manufacturer's material warranty covers defects in the shingle itself — a real, tested product failure, not something caused by how it was installed. It's the same warranty regardless of which contractor puts the shingle down, and most manufacturers require the installer to be certified to activate the longer, enhanced tiers of it.
The workmanship warranty is entirely separate — it's your contractor's own promise covering mistakes made during installation: a nail that missed the strip, flashing that wasn't sealed correctly, a valley that wasn't lapped right. A manufacturer will not honor a material warranty claim caused by bad installation, and a contractor's workmanship warranty doesn't cover a shingle that failed on its own. Ask for both, in writing, and ask specifically whether the workmanship warranty is transferable if you sell the home — real resale value, not just protection while you own it.
What actually happens during a roof replacement
Every one of these steps is the same regardless of which county or city you're in — it's the roof itself that determines the details, not a script.
Every job starts with someone actually looking at your roof — the deck, the flashing, the attic, the slope — not a number quoted from a satellite photo or a drive-by. A real inspection is the only way to know whether the job is a repair or a full replacement, and it's the foundation the written estimate below is built on.
Materials, labor, disposal, and any decking or flashing work are broken out separately — not folded into one lump number you can't verify. You get this before anyone touches your roof, and you keep it to compare against the final invoice.
The old roofing material comes off down to the deck. Layering new shingles over old is faster and cheaper, but it hides exactly the problems — soft decking, hidden moisture — that a tear-off is the only way to actually find and fix.
With the old roof off, the deck itself gets checked for rot, soft spots, and moisture staining. Any decking that needs replacing is called out and priced separately — not hidden in a change order after the crew is already committed to the job.
A moisture barrier goes down across the whole deck before a single shingle is installed, and flashing is set at every edge, valley, and penetration — chimneys, vents — which is where most roofs actually leak, not in the open field of shingles.
Shingles go down following the manufacturer's own nailing pattern and exposure spec — the difference between a roof that's actually rated for its listed wind speed and one that only looks like it on the invoice.
Nail sweep, debris removal, and a walkthrough of the finished roof and gutters before the job is called done — not a truck pulling away the moment the last shingle is nailed.
Manufacturer warranty registration, your contractor's own workmanship warranty terms, and photo documentation of the finished job — the paper trail that protects you if anything comes up later, not just a handshake.
Questions homeowners actually ask about TAMKO
Do you actually install TAMKO, or just list it?
We install it — TAMKO is one of the real manufacturer lines available through your assessment, not a name listed for SEO purposes. Which specific product line fits depends on your roof and budget, which is exactly what the free assessment is for.
Is TAMKO better than the other brands you install?
'Better' depends on what you're optimizing for — wind rating, price point, or how the roof looks from the street all point different directions. See our full brand comparison for the honest tradeoffs rather than a sales answer.
Does the manufacturer's warranty cover installation mistakes?
No — TAMKO's material warranty covers defects in the shingle itself. A separate workmanship warranty from your contractor covers how it was installed. Ask for both, in writing.
How do I know which TAMKO product line is right for my roof?
Materials tier is one part of an itemized estimate, not a separate decision made in isolation — during your free assessment we look at your roof, your budget, and which TAMKO line actually fits before recommending one.
Does TAMKO have a Florida-specific product line?
Not a separate product line, but Florida's climate is exactly why wind rating, impact rating, and algae resistance matter more here than in a milder state — the same TAMKO products other states install, but the SPECS that matter shift toward storm and heat performance.
What's the actual difference between TAMKO's tiers, in plain terms?
Generally: thickness, wind/impact rating, and warranty length go up together as you move from architectural to designer/luxury tiers — see each product line's own page below for the specific numbers, rather than a marketing label.
Does the TAMKO material warranty transfer if I sell my home?
Manufacturer material warranties commonly transfer with the home, though terms and any transfer window vary by product line — confirm the specific terms for the line installed on your roof rather than assuming a generic answer applies.
Can I mix TAMKO products with another manufacturer's on the same roof?
Technically yes, but it can affect eligibility for TAMKO's own extended system warranty, which typically requires matched components from the same manufacturer. Ask during your assessment whether a single-brand system makes sense for your specific job.
How do I confirm TAMKO's current wind and impact ratings myself?
Check TAMKO's own published product specifications directly — manufacturer specs can be updated, and their own current documentation is the authoritative source, more current than any third-party page including this one.
Does TAMKO's tier structure change over time?
Manufacturers do periodically retire, rename, or introduce product lines — the lineup described here reflects what was current and verified as of this page's last update. Confirm current availability during your assessment rather than relying solely on this page.
Is there a downside to choosing TAMKO specifically?
Every brand has real tradeoffs — price point, specific color availability in your area, and exact warranty terms all vary. There's no universally 'wrong' major brand among the ones we install; the fit depends on your specific roof and priorities, not a ranking.
What should I actually bring up with my installer about TAMKO?
Which specific product line fits your budget and roof, current color availability, exact warranty length and transferability, and whether a single-brand system makes sense — the real questions this page is meant to prepare you to ask.